 Ventilation and air conditioning represents significant segment in our business. Purpose of the ventilation system is to bring fresh air into the room and withdrawal of consumed air from the room.
Ventilation duct system consists of spiro (round) ducts, rectangular ducts and fittings like bends, T-pieces, X-pieces, Y-pieces, reducers, couplings, roof hoods, regulating dampers, end caps etc.
Ventilation ducts, rectangular and spiro (round), are used for ventilation and climatisation of space for different purposes, where there is a need for exchange of air.: business buildings, commercial centers, sport halls, production halls, warehouses, swimming pools, commercial banks etc.
The ducts have been producing according to international standards . The best quality materials have been used for the production of the ducts. |
|
 Roof and wall panels, metal sheets and profiles are used in the construction of nearly all types of constuctions, hotels, business centers to sporting facilities and warehouses.
Wide assortment of roof and wall profiles, which we have in stock, together with the production of fascias and components for roof drainage system, enables us to satisfy our costumer needs in a very short term.
Products are available in different colours and thicknesses. To avoid unnecessary waste of material, products could be produced on exact dimension, depending on costumers demands and wishes.
Roof drainage system consists of: gutters, down pipes, brackets, bends, stop ends, gutter outlets. All products are standard dimension and adequately protected from the rust.
They are usable in every climate areas, and resistant on all climate conditions. These products require small attention for maintenance in long-standing usage, while mounting requires minimum tools and accessories. We differentiate semicircular gutter system and rectangular gutter system. |
|
 Apply for covering all types of buildings from prefabricated houses, holiday homes, residential and bussines buildings. Due to its weight, aesthetic appearance and simple assembly it is suitable for covering of buildings which should be upgraded.
When we talk about tegular sheet it is necessary to empasize the constancy of colors, and its endurance, and also the possibility of production in different size according to customers request. The material used is galvanized steel painted with polyester paint or covered with palstisol. |
|
|
"LIMORAD" offers a gutter system for drainage from the roof. The system has a large number of parts and therefore meets all market demands. Applies in all climatic areas, is resistant to all weather conditions. The basic construction of the gutter is steel plate that was previously galvanized after which the material is caused to layer polyvinyl klorid.This layer system gives a special aesthetic appearance. |
|
Roof and facade panels are made of steel sheet with polystyrene, rock wool or polyurethane core. They could be delivered in different colours and dimensions.
Panels are produced with high quality and permanent material. Some of advantages are: quick mounting and easy maintenance, energy saving, high isolation quality, noise reducing, fire resistant on demand etc. Material for panels can be steel, galvanized and plastificated with thickness 0,5 and 0,6 mm. Thickness of core is between 60 mm – 200 mm. |
|
 Aplicable in covering of objects and coating inner and outer walls. The widest use they have in constuction of industrial structures. The basic charasteristics of profile plates is their exceptional durability in high weight, which is why they are very suitable at large distance between supports, and that greatly simplifies and make cheaper construction. Depending on the height of the wave we distinguish OTP-14, OTP-18, OTP-30 and OTP-45.
Profile plates can be supplied in different dimensions according to costumer request, so there is no unnecessary loss of materials. |
|
 Our flat sheets are used for covering and coating the walls as well as to manufacture different decorative elements. The basic material is galvanized steel on which is applied the basic color. The final layer is a plastisol which has excellent attributes. |
|
|
Typical and assembly halls |
|
|
|
|
|
Our system of structures based on elements of the "LINDAB," which means bringing unique konstrukcioni principle, which allows the formation of structures najefikasnije halls, ensuring lower cost of construction. |
|
|
Hall's are made according to the needs of the customer by euro profile, and hot rolled profiles, and may be in the range of 8 to 60 meters, while the length of halls is not limited. Secondary beam structures are very lightweight, and are made of cold bended Z and C-profile, high hardness steel. Light steel sections are made as a "Z", "C" and "CI" sections.They are used for roof construction, closing the walls or door frames and windows. |
|
|
"Z" sections are often used as roof or wall beams, and due to the different regions can be continued. Height "Z" profile are: 100, 120, 150 and 200 mm, sheet thickness is between 1.0 and 2.5 mm, length up to 12.00 m. "C" profile is used for framing doors and windows or as a bearing box for interior walls. Produced in four different dimensions of 100 to 200 mm, a thickness of 1.0 -2.00 mm, length is up to 12.00 m. |
|
 Contemporary line for production of rectangular ducts insure efficiency , economy and quick delivery of ducts and fittings, while at the same time maintain first class quality, using Lindab’s raw material.
Rectangular program consists of: ducts, fittings like (bends, reducers, T pieces, X pieces), grille boxes, end caps, corners, profiles for connecing of the ducts and suspension supplies. |
|
Read more...
|
|
 Material for production of spiro ducts, fittings and connecting elements is galvanized or aluminium sheet metal. We can differentiate VENT and SAFE spiro program. In VENT program ducts and fittings are without the rubber sealing(gasket), while SAFE program is with double rubber sealing, which eliminates the risk of leakage and simplify the mounting. |
|
Read more...
|
|
|
Offer
